Free Mold Inspection in Upstate New York
Free Mold Inspection
in Upstate New York
AllPro Restoration provides free on-site mold inspections across Warren, Washington, Saratoga, and Albany Counties — performed by a NYS-licensed team with 20+ years of local experience.
Free Mold Inspection for Upstate NY Homes & Businesses
A mold inspection is the first step toward understanding what you're actually dealing with — and AllPro offers it at no charge. Our NYS-licensed team visits your property, evaluates visible and suspected mold growth, identifies likely moisture sources, and gives you a clear, straightforward picture of what we found. No pressure. No obligation. Just accurate information from a contractor who has been doing this work in Upstate New York since 2004.
Mold doesn't always announce itself. It grows behind drywall, under flooring, on attic sheathing, in crawl spaces, and inside HVAC systems — often for months before it's visible or produces a noticeable smell. A professional mold inspection catches what a homeowner walkthrough misses. And catching it early consistently means a smaller remediation scope and lower cost.
If you've noticed a musty odor, had recent water damage, or simply want to know the condition of your home before a purchase or sale, call (518) 793-5311 to schedule your free mold inspection. We serve homes & businesses in Warren, Washington, Saratoga, Albany, and surrounding counties throughout Upstate New York. Learn more about our Commercial Mold Remediation Services.
Inspection Performed by a NYS Licensed Mold Contractor
AllPro Restoration holds a current New York State mold remediation contractor license. When one of our team members inspects your property, they bring the training, experience, and regulatory knowledge to identify conditions that a general contractor or home inspector would not. You'll get a professional assessment — not a sales pitch from someone who doesn't understand mold biology and building science.
What Does a Free Mold Inspection Include?
AllPro's free mold inspections are hands-on, professional assessments — not a surface-level glance. Here's what our licensed team evaluates during every inspection:
Visual Assessment of All Accessible Areas
We visually inspect every accessible area of the property — attic, basement, crawl space, bathrooms, utility rooms, and any areas you've flagged as concerns. We're looking for visible mold growth, water staining, efflorescence on concrete, and surface discoloration that indicates past or ongoing moisture.
Moisture Source Identification
Every mold problem has a moisture source. We identify likely causes — whether that's an attic ventilation imbalance, foundation seepage, a plumbing leak, condensation on cold surfaces, or the aftermath of a water damage event. Knowing the source is as important as knowing the mold's location.
Scope Estimation
We provide a preliminary estimate of the affected surface area — a critical number, because New York State law draws its licensing requirements at the 10-square-foot threshold. Understanding scope helps you plan appropriately before committing to next steps.
Written Inspection Summary
Following the inspection, we provide a written summary of what we found, where we found it, what likely caused it, and our professional assessment of urgency. This document is useful for insurance purposes, real estate transactions, and as a baseline record of your property's condition.
Hidden Mold Assessment
We assess areas where mold frequently hides without being visible — behind drywall at plumbing penetrations, on the underside of attic sheathing, on crawl space floor joists, and inside HVAC air handlers. We use moisture meters and our field experience to evaluate suspicious areas even when mold isn't visible to the eye.
Real Estate & Pre-Sale Inspections
For buyers and sellers, a mold inspection provides documented, professional documentation of property condition before closing. AllPro's written inspection report satisfies most real estate disclosure requirements and gives buyers confidence that a licensed contractor has assessed the property.
When Should You Get a Mold Inspection?
A mold inspection isn't only for when you can already see mold. These are the most common situations where a professional inspection prevents a small problem from becoming a large one:
🌫️ Musty or Earthy Smell
A persistent musty odor — especially in basements, attics, or after running the HVAC — is often the first sign of mold growth in a hidden location. The smell precedes visible growth by weeks or months.
💦 Recent Water Damage
Any water intrusion event — burst pipe, appliance leak, flooding, or roof leak — that was not fully dried within 48 hours creates mold risk. An inspection confirms whether mold has taken hold before it spreads further.
🏡 Buying or Selling a Home
A pre-purchase mold inspection protects buyers from inheriting a mold problem. For sellers, a clean inspection report adds value and reduces the risk of a mold-related negotiation or deal collapse at closing.
🤧 Unexplained Health Symptoms
Persistent coughing, congestion, headaches, or worsening allergy symptoms that improve when you leave the home or building can indicate indoor mold exposure. An inspection identifies or rules out mold as the source.
🏚️ Basement or Crawl Space Concerns
Chronic humidity, visible efflorescence on foundation walls, or a history of water in the basement or crawl space are reliable indicators that mold conditions exist — even if mold isn't yet visible.
🏠 Attic Inspection
Attic mold is the most common mold call we receive across Upstate NY — and it's almost never discovered until a home inspection or real estate transaction reveals it. Proactive attic inspections catch ventilation-related mold growth early, before it covers large surface areas of roof sheathing.
🔧 After a Renovation or Repair
Renovations that open walls or disturb building materials can uncover hidden mold, or create new moisture pathways if not properly detailed. A post-renovation inspection confirms the scope before walls are closed back up.
📋 Insurance Claim Documentation
When a mold problem is connected to a covered water damage event, an early inspection from a licensed contractor provides documentation that supports your claim from the outset — before an insurance-directed inspection that may minimize scope.
What Happens After a Free Mold Inspection?
AllPro gives you a clear, honest picture of what we found — and then the decision is entirely yours. Here's what the two most common outcomes look like:
✓ No Significant Mold Found
If the inspection finds no mold or only minor surface conditions that don't require professional remediation, we'll tell you that clearly — and explain any moisture conditions that should be monitored or addressed to prevent future growth. There's no charge, and no pressure to proceed with any services.
→ Mold Is Present — Here's the Path Forward
If we identify mold that requires professional remediation, we provide a written estimate within 24–48 hours, formatted to meet NYS independent assessor requirements. We explain exactly what's involved, how long it takes, and what it will cost — before you commit to anything. Learn about our mold remediation process.
Where Mold Inspections Most Often Uncover Problems
AllPro inspects every area of your property, but these locations are where mold most consistently requires professional attention in Upstate NY homes and buildings:
Attics
The most common mold inspection finding in Upstate NY. Ventilation imbalances cause condensation on cold roof sheathing — mold grows on large surface areas before anyone notices. Often discovered during real estate transactions. Learn more →
Basements
Chronic groundwater seepage, flooding, and high humidity make basements a primary mold environment. Concrete block walls, floor joists, and finished drywall partitions are all inspection targets. Learn more →
Crawl Spaces
Ground moisture evaporating in an unconditioned crawl space condenses on floor joists and subfloor sheathing. Mold here spreads into structural framing above the crawl space if left unaddressed. Learn more →
Bathrooms & Kitchens
Poor exhaust ventilation leads to chronic humidity, promoting mold on grout, caulk, and — more seriously — inside wall cavities behind showers, tubs, and under sinks where leaks go unnoticed.
HVAC & Ductwork
Mold inside air handlers and duct systems distributes spores to every room every time the system runs. HVAC mold can be present for years while building occupants experience ongoing respiratory symptoms without knowing the source.
Water Damage Affected Areas
Any area with a history of water damage — wall cavities, ceilings, subfloor, insulation — is inspected specifically for mold growth that may have developed if drying wasn't completed within 48 hours of the moisture event.
How AllPro's Free Mold Inspection Works — Step by Step
Scheduling and completing a free mold inspection with AllPro is straightforward. Here's exactly what to expect:
Call or Submit a Request Online
Call AllPro at (518) 793-5311 or submit a service request online. Tell us what you're seeing — or what you're concerned about — and we'll schedule an on-site visit at a time that works for you. Most inspections are scheduled within 1–3 business days; emergency situations are prioritized.
On-Site Inspection
An AllPro technician visits your property and conducts a thorough visual assessment. We inspect all accessible areas — attic, basement, crawl space, bathrooms, utility spaces, and any areas of specific concern. We use moisture meters to evaluate building materials in suspicious areas, and we look for conditions (not just symptoms) that indicate mold risk.
Walk-Through Review
Before leaving, we walk you through everything we observed. We explain what we found, what likely caused it, how serious we assess the situation to be, and what we'd recommend as a next step. We answer your questions directly and honestly — we're not here to create urgency that isn't warranted.
Written Inspection Summary
You receive a written summary of the inspection findings — what was observed, where, and what conditions we believe caused or contributed to it. This document is provided at no charge and is useful for insurance claims, real estate transactions, or simply as a record of your property's condition.
Written Estimate (If Remediation Is Warranted)
If remediation is needed, AllPro provides a detailed written estimate within 24–48 hours. Our estimates are formatted to meet the requirements of NYS independent mold assessors, reducing back-and-forth and keeping the project on track. Financing is available for qualified projects. You are under no obligation to proceed — the estimate and inspection are always free.
Free Mold Inspection — Common Questions
Is the mold inspection really free?
Yes. AllPro's on-site mold inspection is free of charge with no obligation. We visit your property, assess what we find, and give you a written summary — at no cost. If remediation is warranted, we'll provide a written estimate. You decide whether to proceed.
What's the difference between a mold inspection and mold testing?
A mold inspection is a professional visual and tactile assessment — a trained contractor evaluates your property for visible mold, moisture conditions, and building factors that promote mold growth. Mold testing (air or surface sampling analyzed by a laboratory) identifies species and spore counts. Testing is performed by an independent licensed mold assessor — a separate party from the remediation contractor under NY State law. AllPro's free inspection is the first step; independent testing follows when the scope indicates remediation above 10 square feet is needed.
Do I need to be present for the inspection?
Yes, we prefer that a homeowner or building representative be present. Walking through findings with someone who knows the property's history helps us identify moisture sources more accurately, and we want you to hear our assessment directly rather than through a secondhand summary.
How long does a mold inspection take?
Most residential mold inspections take between 45 minutes and 2 hours, depending on the size of the property and how many areas require close evaluation. Larger commercial properties or situations involving multiple affected areas may take longer. We'll give you a time estimate when you call.
I can already see mold — do I still need an inspection before remediation?
Yes, and it's still free. Visible mold is usually the tip of the iceberg. An inspection identifies the full scope of growth, the underlying moisture source, and any hidden growth in adjacent areas before remediation is scoped. Skipping this step leads to incomplete remediation — and mold that comes back.
Can I use AllPro's inspection report for my insurance claim?
AllPro's written inspection summary documents what was found and the likely cause — which is useful initial documentation for an insurance claim. However, insurance claims for mold remediation typically require a protocol from an independent licensed mold assessor, which is a separate step from AllPro's inspection. We help you understand exactly what your insurer will need and can connect you with local assessors we've worked with.
Does AllPro inspect commercial properties?
Yes. AllPro provides free mold inspections for commercial buildings, multi-family properties, and rental units throughout Upstate New York. Commercial inspections may require more scheduling flexibility for access; call us at (518) 793-5311 to discuss your property.
Free Mold Inspection Throughout Upstate New York
AllPro Restoration provides free mold inspections across a wide area of Upstate New York. If you're searching for a mold inspector near you, we serve your community:
Warren County: Glens Falls, Queensbury, Lake George, Warrensburg, Bolton Landing, Chestertown, Lake Luzerne, Stony Creek, Thurman, Johnsburg, and surrounding towns.
Washington County: Hudson Falls, Fort Edward, Granville, Salem, Greenwich, Whitehall, Cambridge, Argyle, Hartford, Hebron, and surrounding communities.
Saratoga County: Saratoga Springs, Ballston Spa, Clifton Park, Malta, Mechanicville, Stillwater, Galway, Corinth, and the broader Saratoga County area.
Albany / Capital Region: Albany, Troy, Schenectady, Colonie, Latham, Cohoes, Watervliet, and the greater Capital District.
Essex, Franklin & Hamilton Counties: Ticonderoga, Crown Point, Schroon Lake, and communities in the southern and central Adirondack region.
Schedule Your Free Mold Inspection in Upstate New York
NYS Licensed Contractor · Free On-Site Inspection · No Obligation Written Report · Serving 7 Counties
(518) 793-5311Based in Gansevoort · Serving Warren, Washington, Saratoga & Albany / Capital Region Since 2004